Web Shop

Accessory Decoders

Accessory decoders are static decoders on your layout, deployed to control points and lighting features. Some allow control of solenoid-style point motors, and others give fine servo-control for slow-action points. You need a DCC controller that understands how to drive accessory decoders (most controllers other than the very basic ones can do this).

× Cancel	Train-Tech PC200 Quad Point DCC Controller		Controls 4 solenoids by DCC and external switches. Route store sets routes with one command. Features a built-in CDU for efficient operation of solenoid motors. Easy to programme.				£43
× Cancel	Train-Tech PC2 Quad Point DCC Controller		Controls 4 solenoids by DCC (same as PC200 but without external switch connections)). Route store sets routes with one command. Features a built-in CDU for efficient operation of solenoid motors. Easy to programme.				£38 temp out of stock
× Cancel	YaMoRC YD8008 CDU Solenoid point accessory decoder		High-current, 8-way accessory switching decoder for solenoids				£63
× Cancel	YaMoRC YD8116 light switching accessory decoder		16-way accessory switching decoder for lighting, 2.5A independent outputs, max 5A combined.				£67
× Cancel	YaMoRC YD8044 CDU Solenoid point accessory decoder with Frog		High-current, 4-way accessory switching decoder for solenoids, with Frog switching built-in				£67
× Cancel	Zimo MX820E		19x11x2mm 1A, 1 point (not servo), 2 inputs				temp out of stock
× Cancel	Zimo MX820V		19x11x3mm 1A, 2 points (not servos), 4 inputs				£34
× Cancel	Zimo MX820X		19x11x2mm 1A, 1 point (not servo), 2 inputs, 8 lights				£38
× Cancel	Zimo MX820Y		19x11x3mm 1A, 2 points (not servos), 4 inputs, 16 lights				£42
× Cancel	Zimo MX820Z		19x11x3mm 1A, 0 points, 0 inputs, 16 lights				temp out of stock
× Cancel	Zimo MX821S		105x50x11mm 3A, 8 points (3-pin servos), 0 inputs, 0 lights				£66 special order
× Cancel	Zimo MX821V		105x50x11mm 3A, 8 points (3-pin servos), 16 inputs, 16 lights (100mA each), Railcom for feedback of position				£96 special order